Makelangelo-firmware development talk

Shop Forum Makelangelo Polargraph Art Robot Makelangelo-firmware development talk

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #29062
    Dan
    Keymaster

    Hello! Welcome. If you’re interested in contributing to the open source code known as Makelangelo-firmware, please check out the contributing guide:

    https://github.com/MarginallyClever/Makelangelo-firmware/blob/master/CONTRIBUTING.md

    The rest of this thread will be ongoing discussion about where the code is going.

    #29063
    Dan
    Keymaster

    At the time of writing this platformio is becoming a big thing.
    Also I have just deleted all the old dead branches from the code.

    • This reply was modified 3 years, 10 months ago by Dan.
    #29287
    anzen
    Participant

    bonjour
    j’arrive pas a compiler avec Atom, j’obtiens des erreur

    *** [.pio\build\BIGTREE_SKR_PRO\src\eepromManager.cpp.o] Error 1
    *** [.pio\build\BIGTREE_SKR_PRO\src\gripper_hande.cpp.o] Error 1
    *** [.pio\build\BIGTREE_SKR_PRO\src\robot_delta.cpp.o] Error 1
    *** [.pio\build\BIGTREE_SKR_PRO\src\robot_corexy.cpp.o] Error 1
    *** [.pio\build\BIGTREE_SKR_PRO\src\robot_arm3.cpp.o] Error 1
    *** [.pio\build\BIGTREE_SKR_PRO\src\robot_polargraph.cpp.o] Error 1
    *** [.pio\build\BIGTREE_SKR_PRO\src\robot_scara.cpp.o] Error 1
    *** [.pio\build\BIGTREE_SKR_PRO\src\robot_sixi.cpp.o] Error 1

    #29895
    Vincent98
    Participant

    Hi, the motherboard I use is Arduino Uno R3 and Motor Shield. Is there a suitable firmware for Makelangelo-7.28.2? (the code in your robot’s brain is not the version I expected) I’m getting an error.

    #29899
    Dan
    Keymaster

    It isn’t. There is a much older https://github.com/MarginallyClever/makelangeloFirmwareAMS that has not been updated in a long time.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.