STL Files for Pen/Servo
- This topic has 1 reply, 2 voices, and was last updated 11 months, 2 weeks ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
One of the arms broke that holds the weight below the servo / pen holder. Do you have the STL file for me to print a new piece? There are a few pieces that fit together for the servo / pen unit, but I only need the one that the servo is screwed into that the weight is attached to.
Hi Ronald,
all the parts are open source and here’s just one of many places you can get them: https://www.printables.com/model/407394-makelangelo-pen-holder-2023
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
