Problem on motors of Makelangelo

Home Forum Makelangelo Polargraph Art Robot Problem on motors of Makelangelo

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #28422

    Hi, I built Makelangelo with Rumba +. I thought it was perfect but when I start the software, I connect the device and click “Find home” the motors make micro steps (as if they vibrate), without however turning on themselves. The Pen holder vibrates but remains always in the same place.
    Sorry if I made some translation errors.
    You can help me?


    Is your microstepping 1/16?


    Hi Dan, I solved the problem, the motors had a strange connection but I fixed it.
    But now I have another problem. I can connect the printer, I can use the “Find Home” function and draw the border. But if I start a drawing it doesn’t start. I have tried with “thankyou.dxf” and other default images

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.