Pen up/down confusion with spiral drawing

Home Forum Makelangelo Polargraph Art Robot Pen up/down confusion with spiral drawing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #23048
    Avatartjhawkey
    Participant

    Hi Dan, it seems like the spiral and pulse spiral generators have pen up/down reversed?
    My Makelangelo 5 works properly for generated art and other image conversion selections.

    Thanks.

    #23049
    Avatartjhawkey
    Participant

    Sorry–figured it out.
    The image was reversed not the pen!

    #23071
    Avatartjhawkey
    Participant

    But, not done yet!
    In limited testing, I found that the spiral pattern drifts to the left (eventually the carriage goes off the edge of the board I use).
    Any suggestions? It (Makelangelo 5) can draw an outline pretty well. I haven’t carefully tested all the patterns.
    Cross hatch works fine.

    Thanks!

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.