Pen Diameter
- This topic has 1 reply, 2 voices, and was last updated 7 years, 5 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
In the settings the Pen Diameter is set to 0.8. What would be the consequences of increasing or decreasing the pen diameter.
Great question!
The pen diameter is used by most converters. For example, the scanline converter uses the diameter to adjust how far apart the horizontal lines will be. too far and there will be gaps. Too close and the lines will overlap. Each converter is different so each uses the diameter in a different way. Experiment with it and see what you get!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
