My Makelangelo with Trigorilla board

Home Forum Makelangelo Polargraph Art Robot My Makelangelo with Trigorilla board

Tagged: 

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #29217
    Avatarhiphouser
    Participant

    Hello to all makers.
    I have 40 years old from France.
    And I decide te recycle my old 3D printer board.
    It’s a Trigorilla board and for now with some tests all seems to be working.

    I just have issue with the windows software.
    I don’t really understand what is the way to use softwares using Java.

    Regards from France

    #29222
    DanDan
    Keymaster

    Please describe the “issues with the windows software”.

    The software is written in a way that relies on Java. So java must be installed first.
    Here is an english guide, I hope it helps.

    https://mcr.dozuki.com/Guide/5.+Makelangelo+Software+Guide/5?lang=en

    #29256
    Avatarhiphouser
    Participant

    I have try and it’s okay now.
    Thanx

    #29257
    Avatarhiphouser
    Participant

    Now all it’s done.
    And one issue…
    When I do homming–> OK.
    But when I try to drow a border A4 for exemple my two motor make a lot of noise.
    VREF, or firmeware issue. I don’t understand where i must look to find any solution?

    #29258
    Avatarhiphouser
    Participant

    My motor vibrates and no move for drawing or write borders…

    #29259
    Avatarhiphouser
    Participant

    I use 1 meter of belt.
    when a read LCD screen, I have that:
    F100.00
    A150.00

    and in SETTINGS:
    Home X 169.27
    Home Y 169.27
    Left 170.55
    Right 172.24
    Top 170.55
    Bottom 172.24
    Belt L -487.35
    Belt R 0.00

    May be I must change something?

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.