Micromake Makeboard Mini
- This topic has 1 reply, 2 voices, and was last updated 4 years, 3 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
HI, I have build Makalangelo 5 clone with Micromake Makeboard Mini (RAMPS compatible). I have one as spare doe my Micromake D1 printer.
Working well, I had to set servo to pin 4 because of layout feature of the board.
Gondola was printed from here https://www.thingiverse.com/thing:2494228/filesHere is the picture of my machine:
https://photos.app.goo.gl/Ggg6NoqzAr2vqh7BANice!
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
