I still need you.
I have a problem. When I want to draw the robot he does not remember his origin.
If I connect the robot to the pc it is in picture 2. I can then disconnect the usb and use the SD card to draw it.
On the other hand if I run the robot alone on the SD is a problem, it is in picture 1, and suddenly it makes the drawing impossible.
with the same file if I run it from the pc. No problem.
Thank you for your help.
Uh… I don’t have an immediate answer why.
Somehow the machine does not remember it’s configuration and the SD card does not TELL the machine it’s configuration.
I will have to investigate and get back to you.
You must be logged in to reply to this topic.