GRBL Booting

Home Forum Everything Else GRBL Booting

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #12750
    AvatarAnonymous
    Inactive

    Dear Dan
    Thank you for your useful site.

    I want to use UniversalGcodeSender
    I uploaded Gcode file in UniversalGcodeSender software and I wrote $$ in comment site in UniversalGcodeSender but it shows an error: “Grbl has not finished booting”.
    do you Know this error and Know solve it?

    Thank you very much

    #12765
    DanDan
    Keymaster

    No, I don’t. I can’t guarantee that UniversalGcodeSender works with GRBL.

    #12770
    AvatarAnonymous
    Inactive

    Hi Dan
    Thank you for your reply

    My last problem was solved.

    if I want to use a LASER for cut in “2-axis Arduino CNC Gcode Interpreter”, How do I connect LASER driver to “L293D Motor Driver Expansion Shield for Arduino” to turn off and turn on LASER when cutting?

    How to build an 2-axis Arduino CNC Gcode Interpreter

    #12771
    DanDan
    Keymaster

    There is no obvious way to connect a laser driver to the L293d motor shield. Also…that sounds really dangerous. I do not recommend this.

    #13988
    AvatarAnonymous
    Inactive

    Connect the laser through the button, which will be pressed by the servo

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.