G-Code generation directly from inkscape

This topic is empty.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
2013-05-23 at 19:58 #5925

Anonymous
Inactive

All,

I just found out that Inkscape can generate G-Code
so there’s no need for the Cambam software (and its evaluation…)

It came installed in my Inkscape – but if you want to install it for yourself go to:
http://www.cnc-club.ru/forum/viewtopic.php?f=33&t=35&start=20#windows_install

Enjoy!

2013-05-25 at 09:46 #6399

Anonymous
Inactive

So –
small contribution for the Makelangelo project for the great work,

Inkscape to G-Code tutorial: https://docs.google.com/document/d/1HvMRUH3M1KYFTdkfsoNdIWU6JKIgeQJ9xEOCYoK8Yos/pub

2013-05-26 at 17:05 #6400

Anonymous
Inactive

That’s great! I wrote a similar one a long time ago on the blog. If you use 0 and 90 for the up and down then the DrawbotGUI software can automatically replace the numbers with your current machine settings.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.