DFU inst
- This topic has 1 reply, 2 voices, and was last updated 2 years, 7 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I have a Rumba Aos3D board, it does not work to load via the Com port, Arduino does not see the board, and when loading via DFU, it gives an error
`In file included from H:\Makelangelo-firmware\MServo.cpp:46:
MServo.h:50:10: fatal error: avr/interrupt.h: No such file or directory
50 | #include <avr/interrupt.h>
| ^~~~~~~~~~~~~~~~~
compilation terminated.I’m not familiar with the AOS3D version of the board. I can’t even find a link to the type. Are you correctly using the right tools to compile the code? https://mcr.dozuki.com/Guide/How+to+upload+Makelangelo-firmware+from+Windows+(2021+)/33?lang=en
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
