M3x35 won’t fit in spacer

Shop › Forum › Makelangelo Polargraph Art Robot › M3x35 won’t fit in spacer

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 2015-09-01 at 09:46 #6130
    Anonymous
    Inactive

    I’ve reached the point where I am affixing the LCD screen cover and I’m hitting a snag.

    The M3x35 screws won’t screw fully into the spacers. I’ve screwed in as far as I can into the spacer and now it won’t budge.

    Here’s where I’m at with the screw and spacer. It won’t screw in any farther:

    What should I do? I don’t think I’ve done anything wrong.

    Thanks!

    2015-09-02 at 05:38 #7141
    Anonymous
    Inactive

    The M3x35 screws go on the motor mounts. You should only need an… M3x10(?) on the spacers. It might be a x15.

    Ha! Looking at the documentation I see exactly where I the whole coke bottle. I’ve fixed it now. Thanks for letting us know!

    2015-09-02 at 06:06 #7142
    Anonymous
    Inactive

    There aren’t any M3x10 screws, you’re referring to the M3x15’s. There are four of those which I will put into the LCD assembly. This means I still need four more for the spacers on the controller assembly.

    -R

    2015-09-04 at 16:03 #7143
    Anonymous
    Inactive

    Please PM me your order # and shipping address. I’ll send you the screws.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.