Something to try on your Makelangelo

Shop › Forum › Makelangelo Polargraph Art Robot › Something to try on your Makelangelo

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2014-08-07 at 18:02 #6025
    Anonymous
    Inactive

    http://nicholasclewis.com/projects/inkshield/

    Add an inkjet head. What could go wrong?

    2014-11-03 at 22:38 #6755
    Anonymous
    Inactive

    Yeah, right.
    I did that with a Basic Stamp and parallax’ inkjet shield. Terribly cool stuff.
    Would we just throw the code into the firmware sketch? Yikes.
    Just got mine running, and it’s pretty damned cool. Having the size and bowing issues; need to calibrate that out.
    If all goes well, I think I’d like to make a wall-sized one. Is it just belt length and counterweighting for the spray can?

    2014-11-04 at 00:56 #6756
    Anonymous
    Inactive

    Yep. Make sure to set the tool to spray paint so it taps the nozzle instead of holding it down. Holding it down would lead to a big, big mess.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.