Spot Micro

Spot Micro Operator's Manual

By Dan Royer

Spot Micro Operator's Manual

Step 1 Operating power

There is a 5.1x2.2 barrel jack connector in the robot. It expects 12 volt power and at least 4 amps current. (12v4a)

Click the large image to open full size.

  • There is a 5.1x2.2 barrel jack connector in the robot. It expects 12 volt power and at least 4 amps current. (12v4a)

  • There is room within the casing for a battery. I recommend you make it connect to the 5.1x2.2 power socket.