• tjhawkey
    April 20, 2019 at 17:17 #23048

    Hi Dan, it seems like the spiral and pulse spiral generators have pen up/down reversed?
    My Makelangelo 5 works properly for generated art and other image conversion selections.


    April 20, 2019 at 18:12 #23049

    Sorry–figured it out.
    The image was reversed not the pen!

    April 22, 2019 at 17:18 #23071

    But, not done yet!
    In limited testing, I found that the spiral pattern drifts to the left (eventually the carriage goes off the edge of the board I use).
    Any suggestions? It (Makelangelo 5) can draw an outline pretty well. I haven’t carefully tested all the patterns.
    Cross hatch works fine.


Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)