Hello, I would like advice or help

This topic has 5 replies, 2 voices, and was last updated 5 years, 4 months ago by Dan.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
2018-07-07 at 22:50 #20311

Anonymous
Inactive

Hello, my name is Andres, I’m an engineering student, I’m with my thesis and they asked me to ask in this forum, I want to know how to handle a robotic arm with RAMPS 1.4, if you have any ideas, I already have a base in Arduino

2018-07-08 at 08:48 #20316

Dan
Keymaster

Building an Open Source 3DOF Palletizing Robot

2018-07-08 at 15:08 #20320

Anonymous
Inactive

good thanks for your answer

2018-07-08 at 15:13 #20321

Anonymous
Inactive

but, that part that I understand of the armed assembly, I have these models disassembled to adapt the nema 17 engines and the part that makes me doubt is the controller since I am going to use, RAMP 1.4 with arduino mega 2560
Arm: https://www.amazon.com/SainSmart-Desktop-Robotic-Assembled-MEGA2560/dp/B00NB1DFF2/ref=sr_1_4?s=industrial&ie=UTF8&qid=1531005476&sr=1-4&keywords=brazo+robotico#
controller: https://www.amazon.com/Printer-Controller-Kit-Arduino-Upgraded/dp/B019TNELNU/ref=sr_1_4?s=industrial&ie=UTF8&qid=1530400449&sr=1-4&keywords=ramps+1.4

2018-07-08 at 15:18 #20322

Anonymous
Inactive

because something like that I want to get
https://www.askix.com/como-hacer-brazo-robot-basado-en-adunio-de-una-impresora-3d-y-iphone-6s-en-una-camara-ptz.html

2018-12-05 at 15:40 #21359

Dan
Keymaster

i am cleaning forums and i see no answer to your question. wait. what is your question?
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.