• Dan
    August 25, 2017 at 21:08 #13904

    Some people have asked about the rotating air nozzle I built for the Jigsolve and how it could be added to their own projects. This is a good place to have that discussion.

    smtguide
    August 26, 2017 at 19:45 #13914

    Here is the situation, my main goal is to build a pick & place only for small prototypes and rework, I will in the future add lower heating plate and eventually hot air from above, I have been trying to buy ( I live in China) rework station and have seen so many this year but none of them is more accurate and efficient than my own hand and old 15$ soldering station, I already have this plot (see attachement) X-Y-Z axis controlled via software windows (Gremote/Gcode) air pump I simply added a manual switch and nozzle rotation at the moment is done manually, I am thinking in case I don’t find someone to help modify software simply add a 2 stepper Joystick and use it to controle A axis for nozzle and airpump as well.

    Dan
    August 28, 2017 at 10:35 #13932

    I purchased

    11HY3406-9SK842 http://www.robotdigg.com/product/798
    Adapter http://www.robotdigg.com/product/799
    Nozzle http://www.robotdigg.com/product/800
    Connector are both fine KSH04 is for 4mm OD tube and KSH06 is for 6mm OD tube
    http://www.robotdigg.com/product/606

    and a solenoid valve to release air pressure. Maybe https://www.robotdigg.com/product/1069/TG-series-Solenoid-Valve-TG23-06,-TG22-08 will work?

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

0
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)