Pen up/down confusion with spiral drawing

Shop › Forum › Makelangelo Polargraph Art Robot › Pen up/down confusion with spiral drawing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 2019-04-20 at 17:17 #23048
    tjhawkey
    Participant

    Hi Dan, it seems like the spiral and pulse spiral generators have pen up/down reversed?
    My Makelangelo 5 works properly for generated art and other image conversion selections.

    Thanks.

    2019-04-20 at 18:12 #23049
    tjhawkey
    Participant

    Sorry–figured it out.
    The image was reversed not the pen!

    2019-04-22 at 17:18 #23071
    tjhawkey
    Participant

    But, not done yet!
    In limited testing, I found that the spiral pattern drifts to the left (eventually the carriage goes off the edge of the board I use).
    Any suggestions? It (Makelangelo 5) can draw an outline pretty well. I haven’t carefully tested all the patterns.
    Cross hatch works fine.

    Thanks!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.