Assembly instructions for Rotary Stewart Platform v2 unavailable?

Shop › Forum › Stewart/Gough Platforms › Assembly instructions for Rotary Stewart Platform v2 unavailable?

Tagged: ,

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 2016-09-22 at 21:07 #11034
    Anonymous
    Inactive

    Hi guys,

    My team is facing some issues while assembling the Rotary Stewart Platform v2 kit for our college project.
    The link to the assembly instructions page (learn.marginallyclever.com) simply redirects to the product page.
    I can attempt to assemble the kit, but I am wondering if the admins can get the assembly instructions page back online to make things easier for us.

    Thanks,
    Navin

    2016-09-23 at 11:12 #11037
    Dan
    Keymaster

    Because the v2 ships fully assembled we have no plans to release v2 instructions. When a v3 is built we would make the v2 fully open source.

    Where did you obtain the laser cut parts for the v2? To my knowledge we have not released those files.

    2016-09-23 at 20:56 #11043
    Anonymous
    Inactive

    Files are available on Thingiverse. Assembly instructions were also available here until last month. We have fully assembled the platform and stepper motor arms. Now we only need help with the linking of ball joints with the arms. It would be great if you could mail me the instructions because we are really interested in making this platform work.

    2016-09-24 at 00:14 #11045
    Dan
    Keymaster

    An M3x16 screw through ball joint, the arm, and then a nut. the ball should be on the side AWAY from the base of the platform. do the same thing at the top.

    2016-09-25 at 01:07 #11067
    Anonymous
    Inactive

    Thank you very much Dan. Instructions were clear and I was able to assemble the joints and arms without much difficulty.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.