Marlin 2.0 x Configuration Error

This topic has 8 replies, 2 voices, and was last updated 2 years, 4 months ago by Vincent98.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
2021-11-28 at 22:03 #29921

Vincent98
Participant

Hello, I bought Arduino mega 2560 – Ramps 1.4, I installed Reprap LCD and I changed the Marlin codes you explained in the forum to run it, but it keeps giving an error. Where am I doing wrong? Do you have a Configuration link that is compatible with Makelangelo, with edited codes? Thanks in advance for the answer.

2021-11-28 at 22:11 #29922

Vincent98
Participant

https://drive.google.com/file/d/1cC0ABJa7rFIwuDQpDQwkzjpfC4qUMyra/view?usp=sharing

2021-11-28 at 22:12 #29923

Dan
Keymaster

@Vincent98 yes, here’s the marlin fork I use:
https://github.com/MarginallyClever/Marlin-polargraph/tree/polargraph

If you get another problem please post your full error message and maybe a pastebin of your config settings. Then we can see what you changed and maybe suggest specific fixes.

2021-11-29 at 10:22 #29925

Vincent98
Participant

Dear Dan, first of all many thanks for your reply and help. I downloaded the code and it was successfully uploaded to the card. I’m out right now, when I get to my office, I’ll run it with the mechanism and try it. There is one more thing I am wondering about. I activated the X and Y sections on the motor driver card, but I think Y and Z are active in the code. Should I replace the motor driver? I think the photos I took below will help me explain. Sorry for my English, I’m Turkish.

1- https://drive.google.com/file/d/1NLEJUEMYNIeSLtOpleVAU0jJd5Lai-Wm/view?usp=sharing
2- https://drive.google.com/file/d/1WjJRg8l61ogv8dxWNVJu3shi8L9oOEa5/view?usp=sharing
3- https://drive.google.com/file/d/1j2NfVJ25aWj6rj-c_-L8749Ye07q7TmC/view?usp=sharing

2021-11-29 at 10:23 #29928

Dan
Keymaster

I do not have permission to see the pictures. Try imgur.com?

2021-11-29 at 10:54 #29930

Vincent98
Participant

You can try to view it again. I have successfully installed the code I downloaded from the Github link, but the “conect” button is not active in the makelangelo application. I guess I need to add Makelangelo file to Marlin.

2021-11-29 at 11:07 #29929

Vincent98
Participant

2021-11-29 at 11:08 #29932

Dan
Keymaster

The connect button will never be unavailable but it might have zero USB ports to connect with.

2021-11-29 at 11:18 #29933

Vincent98
Participant

I want to activate it with Makelangelo 7.28.2 or 7.26.0. It depresses me when mistakes occur.
Author

Posts